How to Transform Basic Door Knobs

Less waste, more paint! That's a mantra we can live by, but it's also our intention behind our latest Happily Ever Home DIY tutorial. There's no need to toss perfectly good door knobs when spray paint is around, especially if you have a limited budget. Oh, builder basic hardware, we all know it too well. That bright, shiny brass gold is not many couples' favorite when moving into a new home. This dated look eventually shows their age with rust, tarnish spots, and scratches since their purpose is "just to cheaply complete the project" instead of for the long haul. So using some Rust-Oleum spray paint, elbow grease, and bit of time, we hope we inspire you to upgrade those door knobs from basic to way better!

Upcycle your door knobs with spray paint for a simple home project
How to upgrade your builder basic brass door knots using spray paint

How to Upgrade Your Builder Basic Door Knobs


Difficulty Level: Easy-Medium
Time Investment: 1-2 Weeks (depending on weather and amount of hardware)


PROJECT MATERIALS
Rust-Oleum Clean Metal Primer Spray Paint (White)
Rust-Oleum Metallic Spray Paint (Matte Nickel)
Rust-Oleum Crystal Clear Enamel (Gloss)
Phillips screwdriver
Sandpaper sponge block
• Cardboard boxes
Protective face mask

DECOR ITEMS
• Black and white 4-panel room divider
Door knob tassel

HOW MUCH SPRAY PAINT DO I NEED?
In our house, we have 21 door knobs with coordinating hardware and hinges, so I ended up using 2 cans of matte nickel spray paint, 2 cans of white primer, and 1 can of clear gloss enamel. Each door knob got about 2-3 coats of primer, nickel spray paint, and gloss enamel.

WHAT SHOULD I KNOW ABOUT SPRAY PAINT?
If you're new to spray painting, your DIY world is about to change! First, always read the directions on the spray paint can for optimal results. You need to spray paint in a well-ventilated area, preferably outdoors or in a garage. If you have any respiratory issues like asthma, be sure to always wear a protective mask for chemicals while spraying because it can trigger chest tightness and breathing issues.

While spray painting, try not to get too close to what you're painting as this can create drippy patches. Long strokes of light coats of layered spray paint is a great rule to follow.

For us Virginians, humidity and temperature can play a negative part in your spray painting experience. A common best practice is to only spray paint when the humidity is between 40%-50% and the temperature is between 50°F and 90°F... which means summertime can be the pits for projects. Plan accordingly!

Materials for upgrading builder basic brass door knobs

INSTRUCTIONS
1. Unscrew and detach door knob units from all of your doors. A typical door knob comes in 4 parts: front knob, back knob, latch, and strike plate. For someone who might feel intimidated by never having done this before, have no fear! Door knobs are super easy to uninstall and reinstall; they're like simple puzzle pieces that connect to each other. You can't mess it up!

STRIKE PLATE ADVICE: After a bunch of research, I decided to not spray paint our strike plates. Because the strike plates get the most friction, these parts have the potential to wear down quickly, so after all the work of transforming them, they might not have the long-term quality I was wanting. Strike plates are so inexpensive (e.g., 2 for $2 from Home Depot) that it was worth it to me to not have to go through all the DIY steps with them. Most builder basic strike plates are the same size, but bring in your old plate to your local hardware store to find the perfect fit.

2. Organize your door knob parts. Place the knobs in one box, the latches in another, and the tiny screws in another. This will help keep things together as you prep the various steps in this project!

Tips for spray painting on metal door knobs

3. Using your sanding sponge block, sand your door knobs and latches so that they are no longer shiny. This helps the primer and paint "cling" better for long-term use.

HELPFUL TIP: Don't skip this step! Some tutorials might advise that sanding isn't necessary, but this is a Spray Paint 101 must do, especially because all kinds of hands are continually going to be touching and moving these door knobs. If you're putting the time investment into this, you don't want to have to redo your knobs next month or year! Sanding also helps get rid of dirt and grime that might be lingering on your knobs.

Prepping builder basic brass door knobs for an upcycled spray paint treatment

4. Take out your cardboard boxes and create holes to help your door knobs and latches stand up. You can use an electric drill, screwdriver, or whatever tool to puncture the cardboard. The more door knobs you have, the more upcycled boxes you might need to help you spray paint.

HELPFUL TIP: If you have a local Aldi grocery store near you, they always have free boxes! Their yogurt boxes with circle slots are perfect for drying and curing your door knobs. We eat a lot of yogurt, so it was a fun find to know that their flat red boxes were ideal for this project.

5. Time to Prime! No 2-day shipping necessary for this one. You need to prep your door knobs with your Clean Metal Primer for a great spray paint foundation. When wet, the primer will look glossy. When dry, it gives a matte powdered look. Allow to dry completely before applying additional coats.

6. Once completely dry, turn your door knobs upside down so you can prime the underside of the knobs. The brass color should be completely white by the end of this step. Allow to cure for 24 hours before going silver.

Using Rustoleum clean metal white primer spray paint for upgrading your door knobs

7. While your knobs and latches are drying from their primer treatment, don't forget the screws! To help with your spray painting, poke the screws into a piece of upcycled styrofoam so that they are upright. Take your Matte Nickel spray paint and give a light coat to the tops of the screws. Allow to dry and apply a second coat. Let the screws dry for 48 hours before any kind of installation.

HELPFUL TIP: Because the screws don't get a lot of human touch, a primer coat isn't necessarily needed. Save yourself a step! As long as you let the spray paint cure for 48 hours, it's tough as nails (errr screws)!

Ways to create less waste and upcycle your current builder basic door knob hardware

8. After the knobs and latches' primer has dried for at least 24 hours, it's time to spray paint with your Matte Nickel! Spray in light layers, allowing each coat to dry before adding another one.

9. Once dry, turn the knobs upside down so you can spray paint the underside of the knobs. The white color should be completely silver by the end of this step. Allow to cure for 24 hours before scuffing the paint to add texture and depth.

10. To help your door knobs not look so flat and "painted," you'll want to give a little artistic touch to the exterior with some light scuffing using your sanding block. There are three steps to great looking door knobs: basic, scuffed, and with gloss enamel. (In the photo below, it is a little difficult to tell the difference, but in person, it's very obvious!)

Steps to create a realistically painted door knob with texture
How to use Rustoleum spray paint to upgrade your door knobs

11. Scuff each door knob very lightly in various directions to create small scratches on the surface. You should not see the white primer beneath or you might be scuffing too hard.

HELPFUL TIP: If you have scuffed too hard, no worries! Just lightly spray paint the door knob again and allow to dry. With the amount of door knobs you have, it is likely that there will be a few that need a touch up or two. If this step is needed, be sure to wait another 24 hours before scuffing again.

Scuffed door knob for a beautifully textured spray painted door knob
Spray painted door knobs using Rustoleum Metallic Matte Nickel spray paint and clear gloss enamel

12. Set your knobs on your cardboard surface to give it the glossy treatment with your Crystal Clear Enamel. Lightly spray from multiple directions to make sure your knobs are completely covered with the gloss enamel. This spray dries quickly, so apply another coat after a few minutes. Allow to set for a couple of hours before reinstalling your door knobs.

Finish spray painting door knobs with crystal clear gloss enamel for shiny finish

13. Reinstall your door knobs and latches with your painted screws.

14. That's almost it! While we have finished with this particular tutorial, don't forget to also spray paint your door hinges to match your door knob parts. Go through the same steps as you did with your screws (primer optional), and then you've got some pretty upgraded door hardware and a new look in your home! The time investment is well worth all the money you have saved, and you have created less waste by upcycling your builder basics.

DIY brushed nickel door knobs for a home refresh
Pretty terracotta colored door tassel for silver door knobs and hardware

Other Ways to Fancy Up Your Doors


Beyond upcycling your door knobs, you can refresh your interior with a few styling ideas to make your house, your home.

Find some tassels. We fell in love with this terracotta-colored tassel duo from the Pixi Hill shop on Etsy. They come in so many colors and textures that can help bring color to your doors or even communicate to guests where to find something via your tassel.
Paint your door. Consider a whole new look by painting your doors a color that coordinates with your new door knobs. We're personal fans of DecoArt's Curb Appeal paint for both exterior and interior doors. (You can see how we transformed our front door with their Colonial Black paint!)
Touch up your wall paint and door trim. Over time, the walls are likely to lose a bit of its shine and acquire some dings, so touch up your walls with Patch and Prime and some paint.
Hang a sign or wreath. Depending on the season or preference, decorate that door with something that fits your style! Try to avoid nails by using hooks with command strips that don't damage the door's exterior.

How to create a brushed nickel look for your upcycled interior door knobs with spray paint
Gorgeous shiny new door knobs made with matte nickel silver spray paint
How to spray paint your metal brass door knobs for a new home look

Happily Ever Home is Tidewater and Tulle's DIY home series that is focused on modest & midsize home styling projects for newlyweds who are renters or first-time home owners. Neither of those? We love you, too, and hope you get inspired for your own "making a house a home" projects!

TUTORIAL CREDITS
Photography, Tutorial, and Styling: Chelsea LaVere | Spray Paint: Rust-Oleum | Door Knob Tassel Decor: Pixi Hill via Etsy


Editor's Note: Specially curated by us, the above product links are partner-connected and purchasing through these links means we get a small commission from those brands that helps support this website. You can find our full affiliate disclosure policy here on Tidewater and Tulle.